English

I-Youyi YY-D-300-5 Uhlobo I 5V 60A 100~240V Ukunikezwa kwamandla e-LED

I-Youyi YY-D-300-5 Uhlobo I 5V 60A 100~240V Isithombe Esifakiwe Sokunikezwa Amandla E-LED
  • I-Youyi YY-D-300-5 Uhlobo I 5V 60A 100~240V Ukunikezwa kwamandla e-LED
  • I-Youyi YY-D-300-5 Uhlobo I 5V 60A 100~240V Ukunikezwa kwamandla e-LED

Incazelo emfushane:

I-voltage yokufaka: 100Vac kuya ku-240Vac
Umsebenzi wokuvikela: Ukuvikelwa Kwesekethe Esifushane, Ukuvikela Okungaphezu Komthwalo
Ibanga lokushisa lokusebenza: -10 ℃ ukuya +70 ℃ (-30 ℃ lingaqala)
Ukusebenza Okuphezulu, impilo ende nokuthembeka okuphezulu
I-PCB isebenzisa inqubo yokuhlanganisa ehlelekile

 


  • I-Voltage Yokuphumayo: 5V
  • Okukhiphayo Kukalwe Okwamanje:50A(100Vac to 180Vac);60A(180Vac to 240Vac)
  • Izinga lokushisa lokusebenza:-10℃~70℃
  • Imodi yokupholisa:Ukupholisa kwemvelo
  • Ubukhulu:L220 x W48 x H26
  • Isisindo:350g
    • Whatsapp I-imeyili

    Imininingwane Yomkhiqizo

    Omaka bomkhiqizo

    Ukucaciswa kukagesi

    Faka izici zikagesi

    Okokufaka Ibanga Lamandla Kagesi

    		 90 Vac ~264Vac
    I-Voltage Elinganiselwe Yokufaka
    		 100 Vac ~240Vac

    Ibanga Lefrikhwensi Yokufaka

    		 47HZ ~ 63HZ

    Ibanga Lemvamisa Elinganiselwe

    		 50HZ ~ 60HZ

    Okokufaka kwamanje
    Ubukhulu.3.5A at100Vac okokufaka nomthwalo ogcwele
    Ubukhulu.2.5A kokufaka okungu-240Vac nomthwalo ogcwele

    Inrush current
    ≤80A ku-230Vac

    Isici samandla
    ≥0.95 at 230Vac (Layisha ukuhlolwa) 
    Ukusebenza kahle
    Ukusebenza kahle kufanele kulayishe okungu-100% >86.0% ku-100Vac
    Ukusebenza kahle kufanele kulayishe okungu-100% >89.0% ku-230Vac
    I-Output Electrical Characters

    Amandla Okukhiphayo

    		  300W
    Isiteshi Sokukhiphayo  I-CON2(+)(-)
     I-Voltage Ephumayo Elinganiselwe  +5.0V Vdc
    Ukunemba kwe-voltage 2%
    Ikalwe okwamanje I-100Vac kuya ku-180Vac/50A

    180Vac kuya ku-240Vac/60A

    Phawula: Hlola i-voltage yokuphakelwa kwamandla, kufanele ilinganise itheminali yokuphuma kwamandla.

    Okuphumayo kwe-Ripple & Noise

     Isiteshi Sokukhiphayo  I-Voltage Ephumayo Elinganiselwe

    Okuphumayo kwe-Ripple & Noise
    I-100Vac kuya ku-180Vac(50A)I-180Vac kuya ku-240Vac(60A)
    I-CON2(+)(-) +5.0 Vdc

    ≤300mV

    Phawula: Ripple & Noise

    • I-Bandwidth ye-oscilloscope isethwe ku-20MHz.
    • Ehlangothini lokuphumayo vala ikhebula elingu-10 cm kuma-capacitor e-ceramic angu-0.1uF ngokuhambisana kanye ne-electrolytic capacitor engu-10uF ukuhlola ukugeleza nomsindo.

    Vula Isikhathi Sokubambezeleka

     

    Isiteshi Sokukhiphayo

    		  

    I-Voltage Ephumayo Elinganiselwe

    Vula Isikhathi Sokubambezeleka
    I-100Vac kuya ku-180Vac(50A)

    I-180Vac kuya ku-240Vac(60A)
    I-CON1(+)(-)

    +5.0Vdc

    ≤3S

    Phawula: I-voltage ye-AC ku-voltage ephumayo ngo-90% wesikhathi.

    Phakamisa Isikhathi

     

    Isiteshi Sokukhiphayo

    		  

    I-Voltage Ephumayo Elinganiselwe

    Phakamisa Isikhathi
    I-100Vac kuya ku-180Vac(50A)

    I-180Vac kuya ku-240Vac(60A)
    I-CON1(+)(-)

    +5.0

    ≥5mS

    Phawula: Vala i-voltage yokufaka ye-AC ku-voltage ephumayo engu-90% wesikhathi.

    I-Output Voltage Rise Time

     

    Isiteshi Sokukhiphayo

     

    		  

    I-Voltage Ephumayo Elinganiselwe

     

    I-Output Voltage Rise Time
    I-100Vac kuya ku-180Vac(50A)

    I-180Vac kuya ku-240Vac(60A)
    I-CON2(+)(-)

    +5.0

    ≦100mS

    Phawula: I-voltage ephumayo inyuke isuka ku-10% yaya ku-90% yesikhathi.

     

    I-Overshoot ephumayo

     

    Isiteshi Sokukhiphayo

    		  

    I-Voltage Ephumayo Elinganiselwe

    I-Overshoot ephumayo
    I-100Vac kuya ku-180Vac(50A)

    I-180Vac kuya ku-240Vac(60A)
    I-CON2(+)(-) +5.0 Vdc

    ≦10%

     

    Impendulo Yesikhashana

     

    Isiteshi Sokukhiphayo

    		  

    I-Voltage Ephumayo Elinganiselwe

    		 Impendulo Yesikhashana
    I-100Vac kuya ku-180Vac(50A)

    I-180Vac kuya ku-240Vac(60A)
     

     

     I-CON2(+)(-)

    		  

     

     +5.0 Vdc

    		 Okukhiphayo:0-50%,50%~100% Slew Rate:1A/us,

    Okuphumayo kuyadlula futhi

    I-undershoot kufanele ibe ≤±10% Yesikhathi Sokubuyiswa Kwempendulo Yesikhashana:200us

     

    Umthwalo Onamandla

    Ukunikezwa kwamandla kuyakhuphuka futhi kusebenza ngemithwalo ye-capacitive engu-8000uF.

    Umsebenzi Wokuvikela

    Ukuvikelwa Kwesifunda Esifushane

    Into

    Phawula

    Ukuvikelwa Kwesifunda Esifushane

    		 I-Hiccup, izimo zokuxazulula inkinga, ukuphuma kwamandla kuyabuyiselwa.

     

    Ngaphezulu Ukuvikelwa Kwamanje

    Into

    		 Ngaphezulu Kwamanje

    Phawula
     

    Ngaphezulu Ukuvikelwa Kwamanje

    		  

    120% ~ 160%

    		 Iphoyinti lokucupha le-OCP kufanele libe phakathi kuka-120% no-160%

    yomthwalo olinganiselwe wamanje.Ukukhipha amandla kumele

    lulama ngokuzenzakalelayo ngomthwalo ojwayelekile uma

    isimo sephutha siyasuswa.

     

    Okokufaka Ngaphansi Kokuvikela I-Voltage

    Into

    		 Ngaphansi kwe-Voltage

    Phawula
    Okokufaka Ngaphansi Kokuvikela I-Voltage 70Vac kuya ku-89Vac Akukho ukuvikelwa kwamandla okukhiphayo (0% -100% LOAD).

     

    Okokufaka Ngaphansi Kokubuyisela I-Voltage

    Into

    		 Ukubuyisela

    Phawula
    Okokufaka Ngaphansi Kokubuyisela I-Voltage 88Vac kuya ku-90Vac Ukubuyisela okukhiphayo.(0% -100%LOAD).

    Isimo Semvelo

    I-Ambient Temperature

    Operation Temperature -10℃ ukuya +70℃(-30°C ingaqala phezulu)
    Izinga Lokushisa Lokugcina  -40 ℃ ukuze +85 ℃

     

    Umswakama Ohlobene

    I-Operating Humidity Isihlobo 5%RH kuya ku-90%RH
    Umswakama Ohlobene Nesitoreji  5%RH kuya ku-95%RH

     

    Ukuphakama

    I-Altitude Yokusebenza ≦2000m
    Ukuphakama Kwesitoreji ≦2000m

     

    Isimo sezulu

    Isimo sezulu Faka isicelo esimweni sezulu esishisayo

     

    Indlela Yokupholisa

    Indlela Yokupholisa

    Ukupholisa kwemvelo

     

    Ukunciphisa Amandla

    Iphesenti eliphezulu lomthwalo ophumayo elisuka ku-40°C ukuya ku-50°C lingu-1.0%/°C okungu-274W ku-50°C.

    Iphesenti eliphezulu lomthwalo ophumayo elisuka ku-50°C ukuya ku-70°C lingu-1.67%/°C okungu-204W ku-70°C.

    Ukwethembeka

    CHA.

    Into

    Phawula
     5.1   Power On/off Cycle Imikhiqizo endaweni yezinga lokushisa legumbi, Okokufaka okulinganiselwe kanye

    okukhiphayo, shintsha i-3 s izikhathi eziyi-1000 imvamisa yomjikelezo.
     5.2  Ukuhlola Ukushiswa Imikhiqizo esendaweni engu-40 ℃, okokufaka okungu-220Vac, umthwalo olinganiselwe ophumayo

    ukusebenza amahora angama-72 ngokuqhubekayo.
     

     5.3

    		  

    Ukudlidliza

    I-IEC60068-2-6, i-Sine wave ijabulile, ukusheshisa okungu-10Hz~150Hz ku-25M/S22.5 g ukuphakama;Imizuzu engama-90 nge-eksisi ngayinye kuwo wonke u-X, Y, Z.I-IEC60068-2-6, Okungahleliwe: 5Hz–500Hz ekuphakameni okungu-2.09G RMS.20 amaminithi nge

    i-eksisi yawo wonke u-X,Y,Z isiqondiso

    5.4

    		 Ukwethuka 49m/s²(5G), 11ms, kanye i-eksisi ngayinye ethi X, Y no-Z
     5.5 MTBF I-MTBF Ebaliwe kufanele ibe ngaphezu kwamahora angu-20,000 njenge-Telcordia SR-332 ngayinye lapho i-AC 220V/50Hz kanye nokuphuma komthwalo ogcwele
     5.6 I-Electrolytic

    I-Capacitor Life

    		 Impilo ye-capacitor Ebaliwe izoba iminyaka eyi-10 uma i-AC 220V/50Hz ifaka, u-50% ulayisha ku-35°C ku-ambient.

    Ukuphepha

    CHA.

    Into

    		 Isimo

    Phawula
     

     6.1

    		  

     Amandla e-Dielectric

    		 Amabanga aphansi kuya eSekondari  3000Vac, 5mA, 60S  

     Ayikho i-arc endizayo futhi akukho ukuphazamiseka
    Okuyisisekelo kuya phansi  1500Vac, 5mA, 60S
    Okwesibili kuya phansi  500Vac, 5mA, 60S
      6.2  I-Insulation Resistance Amabanga aphansi kuya eSekondari  500Vdc, ≥10MΩ  Ngaphansi kokucindezela okujwayelekile komkhathi, umswakama ohlobene no-90%, uvivinyo lwe-DC voltage 500V
    Okuyisisekelo kuya phansi
    Okwesibili kuya phansi
     6.3 Ukuvuza kwamanje Amabanga aphansi kuya eSekondari  ≤5.0mA  Ikilasi I
     6.4 I-Ground Impedance  ＜0.1 ohm. 32A／2 amaminithi(UL Imodeli eqinisekisiwe: 40A／2 amaminithi)
     6.5 Isitifiketi Sokuphepha

    /

      

    I-EMI

    Ukunikezwa kwamandla kuhlangabezana ne-EN 55022 CISPR 22 Class.

    I-EMC

    Ukunikezwa kwamandla kuhlangabezana namazinga alandelayo: EN61000-3-2: I-Harmonic Current Emission Class.I-EN 61000-3-3: Ukuguquguquka kwamandla kagesi kanye ne-Flicker

    I-IEC 61000-4-2: Ukukhishwa kwe-Electrostatic, Izinga 4: ≥ 8KV ukuthintana, ≥ 15KV ukukhishwa komoya, Imibandela A.

    I-IEC 61000-4-3: Inkambu ye-Electromagnetic ene-Radiated, Izinga 3. Imibandela A IEC 61000-4-4: I-Electrical Fast Transient, Izinga 3. Umbandela A IEC 61000-4-5: Ukuhlinzwa;Ileveli 3, Umbandela A.

    I-IEC 61000-4-6: Ukuzivikela Okwenziwayo, Izinga le-3 Imibandela A. IEC 61000-4-8: I-10A / Imitha, Imibandela.

    I-IEC 61000-4-11: I-voltage dips kanye nokuphazamiseka.100% dip,1 umjikelezo (20ms), ukuzibuyisela IEC 61000-4-12: Izinga 3, Imibandela A

    Ijika Ijika

    I-Ambient Temperature kanye Nomphumela Wamanje

    1

    I-voltage yokufaka kanye Neyamanje Yokukhiphayo

    2

    Phawula:

    • Ncoma ukuthi i-Power Supply kufanele igxunyekwe ngokuqinile ngokuchazwa kosinki wokushisa.(Usayizi kasinki wokushisa: 250 * 250 * 3mm)
    • Ukunikezwa kwamandla akukwazi ukusetshenziswa ngaphansi kwemvelo engaphezu kuka-264Vac.

    Ubukhulu kanye nesakhiwo

     

    Ubukhulu Ubukhulu: 220mmx48mmx26mm±0.5mm

     3

    Umdwebo wokufaka

    Ngaphezu kwalokho i-aluminium ipuleti ukusebenza

    Ukuze uvumelane nezinga lokushisa elizungezile kanye nejika lamanje lehlayo eliphumayo kanye nogesi wokufakwayo kanye nokuphumayo kwamandla ejika lejika lamanje kufanele kufakwe epuleti le-aluminium, kuphakanyiswa ukuthi usayizi wepuleti le-aluminium uboniswe esithombeni esilandelayo.Ukuze uthuthukise ukuchithwa kokushisa, ingaphezulu le-aluminium kufanele libe bushelelezi.

    4

    Ukuqinisekisa ukukhishwa okuhle kokushisa, okungenani isikhala esingu-5cm esizungeze ugesi kufanele sigcinwe ngesikhathi sokufakwa, njengoba kuboniswe esithombeni esingezansi.

    5

    Phina Uxhumano

    I-CN01(Uhlobo: 8.25mm,3Pin)

    Phina inombolo

    Uphawu

    Umsebenzi

    1

    L

    Okokufaka kwe-AC L

    2

    N

    Okokufaka kwe-AC N

    3

    G

    Ground

     

    I-CN02(Uhlobo: 6*8mm,4Pin)

    Phina inombolo

    Uphawu

    Umsebenzi

    4

    V-

    Okukhiphayo kwe-DC -

    5

    V-

    Okukhiphayo kwe-DC -

    6

    V+

    Okukhiphayo kwe-DC +

    7

    V+

    Okukhiphayo kwe-DC +

  • Okwedlule:
  • Olandelayo:

    • Izigaba zemikhiqizo

    Buza Manje
    Phendula kuwe ngokushesha ngangokunokwenzeka